DB Technologies DVA T 12
 |
700 modèles sont en train de sortir de l’usine du fabricant, vous devriez donc les retrouver très prochainement chez les revendeurs agréés. Pour rappel, le DVA T12 est un modèle trois voies actif de 1400W combinant DSP et convertisseurs AN/NA.
• Long-throw system
• Fully powered three-way unit, freely scalable to setups of any size
• Sequentially configurable array segments
• High-end digital controller (DSP) on board
• Network-ready with an integrated RDnet port
• Hardware compatible with DVA T4 systems
Specifications
Technical data
Speaker Type 3-Way Active Line Array Module
Acoustical data
Frequency Response [+/- 3dB] 60 - 19.000 Hz
Max SPL One Unit: 136 dB
HF 3x1 "
Type HF Neodymium Compression Driver
Voice Coil HF 1.4 "
Directivity 100x10 °
Horn Integrated CD Horn
MF 2x 6.5 "
Type MF Neodymium
Sealed Basket
Phase Plug
Horn Loaded
Voice Coil MF 2 "
LF 12 "
Type LF Neodymium
Voice Coil LF 3 "
Amplifier
Amp Technology G2 digipro
Amp Class Class D
Power Supply 1500 W, PFC SMPS
HF Amp 350 W/RMS
MF Amp 350 W/RMS
LF Amp 710 W/RMS
Cooling Convection
Processor
Controller DSP 56 bit
AD/DA Converter 24 bit/96 kHz
System Presets 8, HF/Low-mid correction
Limiter Dual Active Limiter
Multibandlimiiter
RMS, Peak, Thermal
Crossover Frequency MF-HF 1800 Hz
Slope MF-HF 24 dB/Octave
Crossover Frequency LF-MF 420 Hz
Slope LF-MF 24 dB/Octave
Input Section
Signal Input 1x XLR fem, sym
Signal Output 1x XLR male, sym.
Network RDnet remote control
RJ45 connector IN/OUT
Power Socket 1x Powercon In
1x Powercon Out
Voltage Range 90 - 240 V
Mechanics
Housing Polypropylen PP
Aluminium reinforced
Housing Design Trapezoidal 10°
Color Black
Handles 1x per side
Front Grille 1.5mm metall grille with acoustic foam in back
Rigging Points Integrated rigging hardware
Width 580 mm (23.2 in)
Height 386 mm (15.44 in)
Depth 430 mm (17.2 in)
Weight 29,9 kg (63.93 lbs)
Downloads
Systems / Components
